JQ-1200L Enteral feeding pump Parameter |
Conventional model | 15 d/ml infusion set 0.0ml/h~1200ml/h
20 d/ml infusion set 0.0ml/h~1200ml/h
60 d/ml infusion set 0.0ml/h~300ml/h
Note:minimum resolution of setting flow rate is 0.1mL/h when rate is above 1000mL/h,
the Resolution is 1mL/h. |
Drip Mode | 15 d/ml infusion set 0 d/min~300 d/min
20 d/ml infusion set 0 d/min~400 d/min
60 d/ml infusion set 0 d/min~300 d/min Note:The minimum resolution dripping
speed Settings 1d/min. |
Accuracy | ≤±3%(Note:Under the condition of the benchmark test, using high elastic silicone iv path
accuracy after calibration and commissioning.) |
Bubble Detector | Ultrasonic detection method:Bubble above 25ul is detected |
Total Infusion Volume | 0.0ml-9999ml(0.1ml/h increment,1ml/h increment if over 1000ml/h) |
Volume Limit | 0.0ml-9999ml(0.1ml/h increment,1ml/h increment if over 1000ml/h) |
Occlusion | (H):800±200mmHg (106.7±26.7kPa)
(C):500±100mmHg (66.7±13.3kPa)
(L):300±100mmHg (40.7±13.3kPa) |
History Record | These serial products can maximally store 4500 pieces of history records.
The record includes the following information: Date, flow rate, alarm data, total volume
delivered, occlusion pressure and syringe brand and serial number. |
Alarm | Near empty alarm,Empty alarm,Door open alarm, Bubble alarm,limited value
reached alarm,
AC power failure,Low battery alarm,Battery empty alarm,Remind alarm,Flow
regulator or inlet valve closed alarm (optional) |
Power | Supply Voltage:AC100V~240V(±10%),Power Frequency: 50Hz-60Hz
Built-in Battery:DC15V Ni-MH battery(It can be replaced by lithium ion battery pack
necessary.)
Working time of battery:In case the battery is fully charged, the continuous working time can
be up to 6 hours at the speed of 25ml/h.
Maximum power:30VA;Note:Before the first use of this product, the battery must be charged
while being shut down for more than 12 hours. |
Working Environment | Temperature:+5℃-+40℃
Relative humidity:20%-90%
Environmental pressure:860hPa-1060hPa |
Transport And Storage Environment | Temperature:-20℃~+55℃;
Atmosphere Pressure:500hPa~1060hPa.
products should be stored in the relative humidity in the range of 10% ~ 93%,
no corrosion gas indoor and ventilated. |
Electric Safety Classification | Class I, CF type,Built-in battery,Continuous operation equipment |
Water Proof Level | IPX4 |
Net Weight | 1.6kg(include fastener) |
Dimension | 155mm*125mm*200mm |
